Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Thanks Andy Birko!!!!!
http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=45554
Page 1 of 1

Author:  Hesh [ Fri Apr 17, 2015 4:17 pm ]
Post subject:  Thanks Andy Birko!!!!!

Our friend Andy Birko and his CNC guitar parts company, Birkonium made some special and custom parts for us.

Although I neglected to get a pic of the maple fret board one of our guys is restoring and modifying a 30's archie to be a border crosser. More specifically a guitar with no embargoed parts on it, BRW, etc. So we needed a maple exact replacement and Andy delivered and we are absolutely thrilled.

What I did get a picture of are the custom fretboards that Dave needed for a special project that will lead to a published article about fret wire. If you recall Dave had converted a sewing machine to be a fret wire torture tester. :D Andy delivered again and we are thrilled with the boards pictured below as well.

For those who don't know Andy his company, Birkonium .com a CNC guitar parts maker offers necks, bridges and a host of other very cool products all of superb quality!

Here is a huge thanks to Andy for his very valued assistance!!!!

Author:  Colin North [ Fri Apr 17, 2015 5:15 pm ]
Post subject:  Re: Thanks Andy Birko!!!!!

Hmmm. I wonder what scale length those FB's are. ?

Author:  Bob Garrish [ Fri Apr 17, 2015 5:35 pm ]
Post subject:  Re: Thanks Andy Birko!!!!!

Close, Colin, they're actually +1

Author:  James Ringelspaugh [ Fri Apr 17, 2015 6:36 pm ]
Post subject:  Re: Thanks Andy Birko!!!!!

+1 for Andy... he very recently went above and beyond on some bridges for me and they came out just great. Good stuff!

Author:  Robbie_McD [ Fri Apr 17, 2015 8:20 pm ]
Post subject:  Re: Thanks Andy Birko!!!!!

Agreed, I have had some custom bridges cut by Birkonium and they are amazing!

Author:  DannyV [ Fri Apr 17, 2015 8:25 pm ]
Post subject:  Re: Thanks Andy Birko!!!!!

All I can say is it better not be coming North! There's already enough of us up here. We don't want to see the likes of y'all stompin' on our turf. :lol: (where's the stink eye face when you need it)

Author:  DannyV [ Fri Apr 17, 2015 8:26 pm ]
Post subject:  Re: Thanks Andy Birko!!!!!

Birkonium! Great name Andy.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/